RP2040-Plus, a Pico-like MCU Board Based on Raspberry Pi MCU RP2040, Plus ver.

Description

As same as Raspberry Pi Pico, it incorporates the RP2040 microcontroller, with dual-core Arm Cortex M0+ processor running up to 133 MHz, and 26x multi-function GPIO pins.

What’s different, it features onboard 4MB Flash, USB-C connector, recharge header, and higher current DC-DC chip.
Features

RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
264KB of SRAM, and 4MB of on-board Flash memory
USB-C connector, keeps it up to date, easier to use
Lithium battery recharge/discharge header, suitable for mobile devices
Onboard DC-DC chip TPS63000, high efficiency DC-DC buck-boost chip, 1.8A current switch
Castellated module allows soldering direct to carrier boards
USB 1.1 with device and host support
Low-power sleep and dormant modes
Drag-and-drop programming using mass storage over USB
26 × multi-function GPIO pins
2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
Accurate clock and timer on-chip
Temperature sensor
Accelerated floating-point libraries on-chip
8 × Programmable I/O (PIO) state machines for custom peripheral support

Pinout Definition

rp2040-plus-details-7.jpg
What’s On Board

rp2040-plus-details-intro.jpg

LED user LED (not power indicator)
ETA6096 high efficiency Lithium battery recharge manager
TPS63000 high efficiency DC-DC buck-boost chip
USB Type-C connector
BOOT button press it when resetting to enter download mode
W25Q32JVSSIQ 4MB NOR-Flash
RESET button
RP2040 dual-core processor, up to 133MHz operating frequency
Battery header MX1.25 header, for 3.7V Lithium battery, allows recharging the battery and powering the board at the same time
Pinout compatible with Raspberry Pi Pico
USB test points connecting to USB interface
BOOT test point connecting to BOOT button
DEBUG points

Outline Dimensions

rp2040-plus-details-size.jpg
Resources

Wiki: RP2040-Plus