PiKVM V3 Pre-Assembled


PiKVM V3 Pre-Assembled Edition

After a successful Kickstarter campaign for the PiKVM HAT, we’re excited to offer a complete and ready-to-use PiKVM Pre-Assembled solution!


Based on a Raspberry Pi 4, the PIKVM Pre-Assembled Edition is a cost-effective solution to manage servers or workstations remotely, regardless of the health of the operating system or whether one is installed. You can fix any problem, configure most BIOS, or even reinstall the OS using the virtual CD-ROM or Flash Drive.

Control a computer/device using a web browser!
Low bandwidth usage – 6Mbps for Full-HD approximatively
Full HD 1920 x 1080p 50Hz max resolution HDMI capture device with future audio support
Mass storage emulation – Simulate a virtual flash drive or CD drive using an image file uploaded to PiKVM!
Ability to initiate removal and insertion of USB devices
ATX controller – Switch the machine on or off, reset it, and monitor power & storage LED activity remotely
Automatic variable-speed 5V PWM fan for silent operation
USB & RJ-45 (Cisco-like) serial console for configuration and debugging
OLED display with name, IP address, temperature, CPU load, and uptime
Software: Linux-based, regularly updated by a dedicated team

Technical specifications

Video/Resolution: 1920x1080p at 50Hz or lower
Power: USB-C 5.1V, 3A power supply required (not included)
Real-time clock with rechargeable Super Capacitor
Enclosure: robust 1.6mm (1/16″) steel case
Product dimensions: 92mm x 75mm x 45mm (4″x3″x2″)
Product weight: 410 g (14.5 oz.)
Warranty: 1 year limited


Front: Back: Side:
Power: USB-C ATX Control Video Out: micro HDMI
Serial Console: USB-C + RJ45
(one active at a time) OTG Host USB (USB-C)
2x USB 2.0, 2x USB 3.0 HDMI Video input & output
Gigabit Ethernet

What’s in the Box

PiKVM v3.3 Pre-Assembled
ATX adapter board with motherboard interface wiring
A 32 GB MicroSD card pre-imaged with the PiKVM software

Essential accessories

5.1v 3A power supply with USB-C, Raspberry Pi compatible
A regular HDMI cable
USB-C to USB-A cable with DATA lines (for keyboard and mouse emulation)
Straight Ethernet cable (NOT crossover, to connect the PiKVM and ATX board)


PiKVM Website
PiKVM on GitHub


There are no reviews yet.

Be the first to review “PiKVM V3 Pre-Assembled”

Your email address will not be published. Required fields are marked *