IQaudio DigiAMP+
$36.46
IQaudio DigiAMP+ IQaudio DigiAMP+ uses the Texas Instruments TAS5756M PowerDAC to deliver direct connection to PASSIVE stereo speakers at up to 2x35wpc with variable output. Ideal for a Raspberry Pi-based hi-fi system.
Description
Getting started IQaudio DigiAMP+ connects to the 40-pin GPIO header of Raspberry Pi 1 Model B+, Raspberry Pi 2, Raspberry Pi 3, or Raspberry Pi 4 with no need for soldering. DigiAMP+ must be powered from an external supply, and requires a 12-24V DC power source to its 5.5 mm x 2.5 mm barrel connector. The XP Power VEC65US19 power supply is recommended for use with DigiAMP+.
The DigiAMP+ provides power to the Raspberry Pi through the GPIO connection. DO NOT APPLY POWER TO THE RASPBERRY PI’S OWN POWER INPUT WHEN USING DigiAMP+.
The amplifier is by default muted at power on (mute LED lit). The mute state/LED is under software control (Raspberry Pi GPIO22).
IQAudio DigiAMP+ Features
HAT compliant accessory; EEPROM, mounting holes
Full-HD audio – up to 24-bit/192kHz playback
Up to 2x35w of crystal clear amplification
No soldering required to your Raspberry Pi
Integrated hardware volume control (via ALSA)
Powers the Raspberry Pi from the Pi-DigiAMP+ power input
Linux driver support already delivered within Raspbian
AMP can be enabled / disabled via Raspberry Pi’s GPIO22
Advanced ESD protection
Uses the digital I2S audio signals to reduce CPU load over USB audio solutions
Fully built and tested Raspberry Pi accessory
Designed and manufactured in the UK
Resources
Data sheet and configuration instructions
Reviews
There are no reviews yet.