4G / 3G / 2G / GSM / GPRS / GNSS HAT for Raspberry Pi, LTE CAT4, the Global Version

Description

You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
Features

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.
Supports GPS, BeiDou, Glonass, LBS base station positioning
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
Onboard CP2102 USB to UART converter, for serial debugging
Breakout UART control pins, to connect with host boards like Arduino/STM32
SIM card slot, supports 1.8V/3V SIM card
TF card slot for storing data like files, messages, etc.
Onboard audio jack and audio decoder for making telephone call
2x LED indicators, easy to monitor the working status
Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
Baudrate: 300bps ~ 4Mbps (default: 115200bps)
Autobauding baudrate: 9600bps ~ 115200bps
Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Communications Specifications
　 LTE WCDMA / TD-SCDMA / CDMA 2000 EDGE GSM/GPRS
Band SIM7600A-H:
LTE-FDD B2/B4/B12 SIM7600A-H:
UMTS/HSPA+ B2/B5 Not available
SIM7600E-H:
LTE-FDD B1/B3/B5/B7/B8/B20
LTE-TDD B38/B40/B41 SIM7600E-H:
UMTS/HSPA+ B1/B5/B8 GSM/GPRS/EDGE 900/1800 MHz
SIM7600CE-T:
LTE-TDD B38/B39/B40/B41
LTE-FDD B1/B3/B8 SIM7600CE-T:
UMTS/HSDPA/HSPA+ B1/B8
TD-SCDMA B34/B39
CDMA 1X/EVDO BC0
SIM7600G-H:
LTE-TDD B34/B38/B39/B40/B41
LTE-FDD B1/B2/B3/B4/B5/B7/B8
/B12/B13/B18/B19/B20/B25/B26/B28/B66 SIM7600G-H:
UMTS/HSDPA/HSPA+ B1/B2/B4/B5/B6/B8/B19 SIM7600G-H:
GSM/GPRS/EDGE 850/900/1800/1900MH
Generation 4G 3G 2.5G 2G
Emitting power 0.25W 0.5W@EGSM900
0.4W@DCS1800 2W@GSM900
1W@DCS1800
Data Speed LTE CAT 4
Uplink≤50 Mbps
Downlink≤150 Mbps UMTS
Uplink≤384Kbps
Downlink≤384Kbps EDGE
Uplink≤236.8kbps
Downlink≤236.8kbps GPRS
Uplink≤85.6kbps
Downlink≤85.6kbps
　　　 HSPA+
Uplink≤5.76Mbps
Downlink≤42Mbps 　　　 　　　
SIM Card Normal SIM (Not Included)
GNSS Specifications

Receiver type
16-channel
C/A code
Sensitivity
Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BD)
Cold starts: -148 dBm
Time-To-First-Fix (open air)
Cold starts: <35s Hot starts: <1s Accuracy Position: <2.5m CEP SMS and Audio Specifications SMS Supported types: MT, MO, CB, Text, PDU Storage: USIM card and ME (default) Audio feature Supports echo cancellation Supports noise reduction Other Specifications Power supply: 5V Operating voltage: 5V/3.3V (configured via jumper) Operating temperature: -30°C ~ 80°C Storage temperature: -45°C ~ 90°C Dimension: 56.21mm x 65.15mm What's on Board SIM7600G-H CP2102 USB to UART converter NAU8810 audio decoder TXS0108EPWR voltage translator: translates 3.3V/5V into 1.8V MP2128DT power chip MP1482 power chip Raspberry Pi GPIO header: for connecting with Raspberry Pi SIM7600 control interface: for connecting with host boards like Arduino/STM32 SIM card slot: supports 1.8V/3V SIM card TF card slot: allows file/SMS/... storage 3.5mm earphone/mic jack USB interface: for testing AT Commands, getting GPS positioning data, etc. USB to UART interface: for serial debugging, or login to Raspberry Pi MAIN antenna connector AUX antenna connector GNSS antenna connector Power switch Network status indicator Power indicator Operating voltage selection jumper: VCCIO - 3.3V: set operating voltage as 3.3V VCCIO - 5V: set operating voltage as 5V UART selection jumper: A: access Raspberry Pi via USB to UART B: control the SIM7600 by Raspberry Pi C: control the SIM7600 via USB to UART Dimension Development Resources Wiki : www.waveshare.com/wiki/SIM7600G-H_4G_HAT