No products in the cart.
2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero, 250×122, ABS Case
Waveshare 20716 – 2.13inch Touch E-Paper E-Ink Display For Raspberry Pi Zero, 250×122 Pixels, with ABS Protection Case
Features 2.13″ capacitive touch e-Paper display, 5-point touch, 250×122 pixels
Supports waken up by user-defined gesture
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W / Zero 2 W
Comes with development resources and manual (examples for Raspberry Pi)
Highly aligned connectors, rounded corner design, slant sides for easily standing
Heat dissipation holes on the back – combined with thermal tape, effective heat dissipation
OPERATING VOLTAGE 3.3V
GREY SCALE 2
INTERFACE 3-wire SPI, 4-wire SPI
PARTIAL REFRESH TIME 0.3s
OUTLINE DIMENSIONS 69.15 x38.90mm
FULL REFRESH TIME 2s
DISPLAY SIZE 48.55 x23.70mm
DOT PITCH 0.194 x0.194mm
STANDBY CURRENT <0.01uA (almost none) RESOLUTION 250×122 pixels VIEWING ANGLE >170°
DISPLAY COLOR black, white
TOUCH POINT 5 (max)
Advantages Of EINK
E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.
How To Install
2.13inch Touch e-Paper HAT x1
ABS case x1
Thermal tape x1
Rubber feet 4PCS x1
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
There are no reviews yet.