128×64, 1.3inch OLED display HAT for Raspberry Pi


Waveshare 13890 – 1.3inch OLED Display HAT For Raspberry Pi, 128×64 Pixels, SPI/I2C Interface

This is an OLED display HAT for Raspberry Pi, 1.3inch diagonal, 128×64 pixels, with embedded controller, communicating via SPI or I2C interface.


Trying to add a control interface for your Pi? This compact display would be the ideal choice.

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Optional interfaces: 4-wire SPI, 3-wire SPI, I2C, configured via onboard resistor
1x joystick (5-position), 3x pushbuttons, handy and useful
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano)


Driver: SH1106
Interface: 4-wire SPI, 3-wire SPI, I2C
Display color: blue
Resolution: 128×64
Operating voltage: 3.3V

KEY1 P21 Button 1/GPIO
KEY2 P20 Button 2/GPIO
KEY3 P16 Button 3/GPIO
Joystick Up P6 Joystick Up
Joystick Down P19 Joystick Down
Joystick Left P5 Joystick Left
Joystick Right P26 Joystick Right
Joystick Press P13 Joystick Press
SCLK P11/SCLK SPI clock input
MOSI P10/MOSI SPI data input
DC P24 Data/Command selection (high for data, low for command)
CS P8/CE0 Chip selection, low active
RST P25 Reset, low active

1.3inch OLED HAT dimensions
Development Resources

Wiki : www.waveshare.com/wiki/1.3inch_OLED_HAT


There are no reviews yet.

Be the first to review “128×64, 1.3inch OLED display HAT for Raspberry Pi”

Your email address will not be published. Required fields are marked *