128×32, 2.23inch OLED display HAT for Raspberry Pi

$23.91

Waveshare 17009 – 2.23inch OLED Display HAT For Raspberry Pi, 128×32 Pixels, SPI/I2C Interface

This is an OLED display HAT for Raspberry Pi, 2.23inch diagonal, 128×32 pixels, with embedded SSD1305 driver, communicating via SPI or I2C interface.

Description

Trying to add a control interface for your Pi? This compact display would be the ideal choice.
Features

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Optional interfaces: SPI (default), or I2C, configured via onboard resistor
Brings control pins for host boards like Arduino/STM32

Specifications

Driver: SSD1305
Interface: SPI / I2C
Display size: 2.23inch diagonal
Display color: white
Resolution: 128×32
Viewing angle: >160°
Power supply voltage: 3.3V/5V
Logic level: 3.3V

Demo

2.23inch OLED HAT demo
Interface
SYMBOL RASPBERRY PI PIN (BCM) DESCRIPTION
VCC 3V3/5V Power input
GND GND Ground
DIN MOSI SPI data input
CLK SCLK SPI clock input
CS CE0 Chip selection, low active
DC P24 Data/Command selection (high for data, low for command)
RST P25 Reset, low active
Dimensions

2.23inch OLED HAT dimensions
Development Resources

Wiki : www.waveshare.com/wiki/2.23inch_OLED_HAT

Reviews

There are no reviews yet.

Be the first to review “128×32, 2.23inch OLED display HAT for Raspberry Pi”

Your email address will not be published. Required fields are marked *